1/32 Silverwings RAAF Bristol Bulldog

Member's Area Reader's Models
Photo's of Member's modelling projects and images of the completed articles

Re: 1/32 Silverwings RAAF Bristol Bulldog

Postby ericg » Sun Jul 07, 2019 12:26 pm

Thanks gentlemen.

Tony, which Demon kit?

Some more work.

I made up some spark plug leads and attachments from .3mm lead wire and plastic rod.

Image

these were then attached to the spark plugs and ran down each side of the intake tubes. Only the top half of each cylinder will be visible.

Image

I fitted brass rod for pushrods on each cylinder. There are 4 per cylinder.

Image
ericg
Devotee
 
Posts: 1192
Joined: Wed Aug 10, 2011 7:32 am

Previous