spraying Gunze acrylics

Member's Area Hints and Tips Airbrushing and painting
An area for members to pass on any hint's and tips relating to airbrushing and painting of model related subjects.

spraying Gunze acrylics

Postby Airtourer » Mon Apr 25, 2011 1:43 pm

I usually use Humbrol enamels which are brilliant paints, but lately I have been using Gunze acrylics. I have found that by mixing a little lacquer thinners with the paint makes it spray beautifully, the thinners also "bites" into the plastic just a tad giving great adhesion. With my air brush I spray at 30psi and regardless of what paint I am using I always clean the air brush with lacquer thinners.

Des.
User avatar
Airtourer
Newbie
 
Posts: 9
Joined: Mon Apr 25, 2011 8:50 am
Location: Shoalhaven Heads. NSW.